News

Before selecting an "adjustable hospital bed," the most critical step is not to tally up the number of features, but rather to clearly define the patient's actual requirements. This is because different patients have distinct needs and expectations regarding their hospital beds.

Beds Equipped with Backup Batteries Are Less Affected by Power Outages Some hospital beds are designed with a built-in backup power supply. When a power outage occurs, the bed can switch over to its backup power source. Consequently, it remains capable of performing a limited range of movements.

The main categories of hospital beds include: • Manual hospital beds • Semi-electric hospital beds • Electric hospital beds • ICU hospital beds • Emergency/Rescue beds • Maternity beds • Orthopedic beds • Burn care beds • Rehabilitation beds • Geriatric care beds

Low Position: Typically ranges from approximately 7 to 15 inches. For certain "low-bed" models of adjustable hospital beds, the mattress surface may sit only about 7 to 15 inches above the floor when set to its lowest position. This low-profile design is primarily intended to enhance safety.

The core difference among these three types of hospital beds lies in their adjustment mechanisms: • Manual Beds: Rely on mechanical cranks for adjustment. • Semi-Electric Beds: Feature a combination of electric and manual adjustments. • Fully Electric Beds (Electric Hospital Beds): All major adjustments are controlled electrically.

Yes, they do. While many people assume that any standard mattress can be used on an electric multi-functional hospital bed, the reality is that ordinary mattresses are incompatible with these beds in terms of structure, flexibility, support mechanisms, bending capabilities, and their compatibility with the bed's multi-segmented platform.

An electric adjustable hospital bed is a medical bed driven by electric motors, allowing for adjustments to the bed's angle and height via a remote control or control panel. Unlike traditional beds—which rely solely on manual cranks for adjustment—this device utilizes electric power to articulate various sections of the bed frame.

Step 1: Ensure the patient's safety. Step 2: Disconnect the power supply and confirm that the system is completely shut down. Step 3: Locate the emergency operation port at the rear of the motor. Step 4: Insert the manual tool (wrench or hex key). Step 5: Slowly rotate the tool in the direction indicated by the arrow. Step 6: Observe the bed as it lowers. Step 7: Stop the operation once the bed has reached a safe height. Step 8: Confirm that the bed is stable.

• If comfort, safety, ease of care, and functionality are prioritized, electric hospital beds are a better choice. • If budget is limited and care needs are not high, manual hospital beds can also meet basic requirements.

For patients with unstable vital signs, requiring continuous monitoring and frequent nursing procedures, every piece of equipment in the medical environment is crucial, and one of the most core and frequently used pieces of equipment is the electric ICU bed.